calice03 - DHCAL DAQ

customistaions

/etc/fstab

add calice00 disks

/dev/VolGroup00/LogVol00 /                       ext3    defaults        1 1
LABEL=/boot             /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
/dev/VolGroup00/LogVol01 swap                    swap    defaults        0 0
/dev/md0                /mnt/data               ext3    defaults        0 0
calice00:/srv/data00   /srv/data00              nfs     defaults        0 0
calice00:/srv/data01   /srv/data01              nfs     defaults        0 0

/etc/ssh/sshd_config

allow pubkey authentification

#       $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6

#RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile      .ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no
#PasswordAuthentication no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing, 
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication mechanism. 
# Depending on your PAM configuration, this may bypass the setting of 
# PasswordAuthentication, PermitEmptyPasswords, and 
# "PermitRootLogin without-password". If you just want the PAM account and 
# session checks to run without PAM authentication, then enable this but set 
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes

# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES 
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT 
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem       sftp    /usr/libexec/openssh/sftp-server

/etc/resolv.conf

switch to FNAL nameserver and add searches

search fnal.gov anl.gov desy.de
nameserver 131.225.8.120
nameserver 131.225.17.150
#nameserver 146.139.254.5
#nameserver 146.139.254.3
search localdomain

/etc/sysconfig/network

change name to calice03; change gateway to caliceserv

NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=calice03
GATEWAY=192.168.0.51

/etc/sysconfig/network-scripts/ifcfg-eth0

change IP address to DAQ network address

# Intel Corporation 82566DM-2 Gigabit Network Connection
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:25:90:04:88:A6
IPADDR=10.0.0.13
NETMASK=255.255.255.0
ONBOOT=yes

/etc/sysconfig/network-scripts/ifcfg-eth1

change IP address to CALICE network address; make it static

# 3Com Corporation 3c905 100BaseTX [Boomerang]
DEVICE=eth1
BOOTPROTO=static
HWADDR=00:60:97:37:95:a6
IPADDR=192.168.0.13
NETMASK=255.255.255.0
ONBOOT=yes

DAQcalice03 (last edited 2010-10-02 02:39:28 by BenjaminLutz)