Differences between revisions 63 and 73 (spanning 10 versions)
⇤ ← Revision 63 as of 2016-07-25 09:45:09 →
Size: 11826
Editor: EldwanBrianne
Comment:
← Revision 73 as of 2018-02-21 14:00:58 → ⇥
Size: 13894
Editor: ChristianGraf
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Line 6: Line 5:
Line 10: Line 8:
Line 20: Line 17:
Line 22: Line 18:
Line 26: Line 21:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal || '''ahc2_pedestal_007''' || Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3744 constants ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal || '''ahc2_pedestal_010''' || '''Correction of a major bug in Pedestal extraction code (shift of channels and wrong pedestal value extracted), 3744 constants''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal || '''ahc2_pedestal_013''' || Pedestal Calibration from Sarah Schroeder (Master thesis), using only ET Pedestals - no EBUs - 3744 constants ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal || '''ahc2_pedestal_014''' || Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals - no EBUs - 3744 constants ||		 ||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal ||'''ahc2_pedestal_007''' ||Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3744 constants ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal ||'''ahc2_pedestal_010''' ||'''Correction of a major bug in Pedestal extraction code (shift of channels and wrong pedestal value extracted), 3744 constants''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal ||'''ahc2_pedestal_013''' ||Pedestal Calibration from Sarah Schroeder (Master thesis), using only ET Pedestals - no EBUs - 3744 constants ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal ||'''ahc2_pedestal_014''' ||Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals - no EBUs - 3744 constants ||
Line 33: Line 29:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants ||'''ahc2_mip_constants_005''' ||MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_007) ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants ||'''ahc2_mip_constants_008''' ||'''MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_010)''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants ||'''ahc2_mip_constants_006''' ||MIP Calibration from Sarah Schroeder, no EBUs - 3744 channels (using '''ahc2_pedestal_013''') ||
Line 34: Line 34:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants || '''ahc2_mip_constants_005''' || MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_007) ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants || '''ahc2_mip_constants_008''' || '''MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_010)''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants || '''ahc2_mip_constants_006''' || MIP Calibration from Sarah Schroeder, no EBUs - 3744 channels (using '''ahc2_pedestal_013''') ||
Line 40: Line 36:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes ||'''ahc2_mip_slopes_003''' ||Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_005) ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes ||'''ahc2_mip_slopes_006''' ||'''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_008)''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes ||'''ahc2_mip_slopes_004''' ||Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from '''ahc2_mip_constants_006''') ||
Line 41: Line 41:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes || '''ahc2_mip_slopes_003''' || Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_005) ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes || '''ahc2_mip_slopes_006''' || '''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_008)''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes || '''ahc2_mip_slopes_004''' || Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from '''ahc2_mip_constants_006''') ||
Line 47: Line 43:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants ||'''ahc2_gain_constants_004''' ||'''Gain constants extracted from July Gain runs (04/07 to 08/07), 3744 channels, default value of Gain in case of no constant fitted''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants ||'''ahc2_gain_constants_005''' ||Gain constants from Sarah Schroeder, no EBUs - 3744 channels - default values for EBUs ||
Line 48: Line 47:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants || '''ahc2_gain_constants_004''' || '''Gain constants extracted from July Gain runs (04/07 to 08/07), 3744 channels, default value of Gain in case of no constant fitted'''||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants || '''ahc2_gain_constants_005''' || Gain constants from Sarah Schroeder, no EBUs - 3744 channels - default values for EBUs ||
Line 53: Line 49:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes ||'''ahc2_gain_slopes_003''' ||'''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_004)''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes ||'''ahc2_gain_slopes_004''' ||Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from '''ahc2_gain_constants_005''') ||
Line 54: Line 53:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes || '''ahc2_gain_slopes_003''' || '''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_004)''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes || '''ahc2_gain_slopes_004''' || Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from '''ahc2_gain_constants_005''') ||
Line 59: Line 55:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap ||'''ahc2_DeadCells_008''' ||List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap ||'''ahc2_DeadCells_014''' ||'''Corrected List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap ||'''ahc2_DeadCells_017''' ||'''Corrected List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels, few channels added ''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap ||'''ahc2_DeadCells_015''' ||List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (ET Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap ||'''ahc2_DeadCells_016''' ||List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels ||
Line 60: Line 62:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap || '''ahc2_DeadCells_008''' || List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap || '''ahc2_DeadCells_014''' || '''Corrected List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap || '''ahc2_DeadCells_015''' || List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (ET Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap || '''ahc2_DeadCells_016''' || List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels ||
Line 67: Line 64:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/TimeSlopes ||'''ahc2_time_slopes_001''' ||Default time slope of 1.6 ns/TDC ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/TimePedestal ||'''ahc2_time_Ped_001''' ||Default Pedestal for TDC of 1000 ||
Line 68: Line 68:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/TimeSlopes || '''ahc2_time_slopes_001''' || Default time slope of 1.6 ns/TDC ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/TimePedestal || '''ahc2_time_Ped_001''' || Default Pedestal for TDC of 1000 ||
Line 73: Line 70:
||/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration ||ahc2_IC_003 ||Default HG/LG Intercalibration 10 ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration ||ahc2_IC_004 ||HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, without EBU ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration ||'''ahc2_IC_006''' ||'''HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, with default value of 10 for the EBUs''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration ||'''ahc2_IC_008''' ||'''HG/LG Intercalibration one value per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the others the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration ||'''ahc2_IC_009''' ||''' HG/LG Intercalibration per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the new ITEP boards and the old ITEP boards th IC values has been extracted from electrons data (using Yuji's method), except for layer 6 and 10, for them the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept.''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/PhysicsCalibIntercalibration ||'''ahc2_PhysicsCalibIC_002''' ||'''Default Physics/Calib Intercalibration of 1. and 7. for new ITEP''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters ||ahc2_Sat_001 ||Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters ||'''ahc2_Sat_002''' ||'''Neffpx for layer 3 changed to 2300 and for layer 6 to 10 to 1100 (based hit energy spectra shape comparison assuming 10% XT)''' ||
Line 74: Line 79:
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration || ahc2_IC_003 || Default HG/LG Intercalibration 10 ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration || ahc2_IC_004 || HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, without EBU ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration || '''ahc2_IC_005''' || '''HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, with EBU with default value of 10''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/PhysicsCalibIntercalibration || '''ahc2_PhysicsCalibIC_002''' || '''Default Physics/Calib Intercalibration of 1. and 7. for new ITEP''' ||
|| /cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters || '''ahc2_Sat_001''' || '''Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet''' ||
||/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters ||'''ahc2_Sat_003''' ||'''Neffpx tuned using electrons data only for Mainz board (2000) and Old ITEP boards(900). The others are kept with the Neffpx = Real number of pixels''' ||
Line 81: Line 84:
Line 85: Line 87:

|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal || '''ahc2_pedestal_002''' || '''Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal || '''ahc2_pedestal_004''' || '''Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1''' ||		 ||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal ||'''ahc2_pedestal_002''' ||'''Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal ||'''ahc2_pedestal_004''' ||'''Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1''' ||
Line 92: Line 93:

|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants || '''ahc2_mip_constants_003''' || '''MIP Calibration from SPS July 2015, 3888 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant, default value of 80 for EBU_1 (using ahc2_pedestal_002)''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants || '''ahc2_mip_constants_004''' || '''MIP Calibration from SPS July 2015 from Sarah Schroeder (Master Thesis), 3888 channels (using ahc2_pedestal_004)''' ||		 ||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants ||'''ahc2_mip_constants_003''' ||'''MIP Calibration from SPS July 2015, 3888 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant, default value of 80 for EBU_1 (using ahc2_pedestal_002)''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants ||'''ahc2_mip_constants_004''' ||'''MIP Calibration from SPS July 2015 from Sarah Schroeder (Master Thesis), 3888 channels (using ahc2_pedestal_004)''' ||
Line 99: Line 99:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes ||'''ahc2_mip_slopes_003''' ||'''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_003)''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes ||'''ahc2_mip_slopes_004''' ||'''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_004)''' ||
Line 100: Line 103:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes || '''ahc2_mip_slopes_003''' || '''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_003)''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes || '''ahc2_mip_slopes_004''' || '''Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_004)''' ||
Line 105: Line 105:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants ||'''ahc2_gain_constants_001''' ||'''Gain constants extracted from July Gain runs (04/07 to 08/07), 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants ||'''ahc2_gain_constants_002''' ||'''Gain constants from Sarah Schroeder, no EBUs, 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1''' ||
Line 106: Line 109:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants || '''ahc2_gain_constants_001''' || '''Gain constants extracted from July Gain runs (04/07 to 08/07), 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1'''||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants || '''ahc2_gain_constants_002''' || '''Gain constants from Sarah Schroeder, no EBUs, 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1'''||
Line 111: Line 111:

|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes || '''ahc2_gain_slopes_002''' || '''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_001)''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes || '''ahc2_gain_slopes_003''' || '''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_002)''' ||		 ||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes ||'''ahc2_gain_slopes_002''' ||'''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_001)''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes ||'''ahc2_gain_slopes_003''' ||'''Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_002)''' ||
Line 118: Line 117:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap ||'''ahc2_DeadCells_003''' ||'''List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, EBU_1 included, T0s and Cherenkow are kept.''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap ||'''ahc2_DeadCells_005''' ||''' List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), EBU_1 included, T0s and Cherenkow are kept.''' ||
Line 119: Line 121:
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap || '''ahc2_DeadCells_003''' || '''List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, EBU_1 included, T0s and Cherenkow are kept.''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap || '''ahc2_DeadCells_005''' || ''' List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), EBU_1 included, T0s and Cherenkow are kept.''' ||
Line 124: Line 123:
||Folder ||DB Tag ||Comments ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/TimeSlopes ||'''ahc2_time_slopes_001''' ||Default time slope of 1.6 ns/TDC ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/TimePedestal ||'''ahc2_time_Ped_001''' ||Default Pedestal for TDC of 1000 ||
Line 125: Line 127:
'''TO DO'''
|| Folder || DB Tag || Comments ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/TimeSlopes || '''ahc2_time_slopes_001''' || Default time slope of 1.6 ns/TDC ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/TimePedestal || '''ahc2_time_Ped_001''' || Default Pedestal for TDC of 1000 ||
Line 131: Line 129:

|| /cd_calice_cernSPS2015/TestbeamAugust2015/Intercalibration || '''ahc2_IC_002''' || '''Default HG/LG Intercalibration 10''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/PhysicsCalibIntercalibration || '''ahc2_PhysicsCalibIC_001''' || '''Default Physics/Calib Intercalibration of 1. and 7. for new ITEP''' ||
|| /cd_calice_cernSPS2015/TestbeamAugust2015/SaturationParameters || '''ahc2_Sat_001''' || '''Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet''' ||		 ||/cd_calice_cernSPS2015/TestbeamAugust2015/Intercalibration ||'''ahc2_IC_002''' ||'''Default HG/LG Intercalibration 10''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/Intercalibration ||'''ahc2_IC_003''' ||''' HG/LG Intercalibration per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the new ITEP boards and the old ITEP boards the IC values has been extracted from electrons data (using Yuji's method), except for layer 6 and 10, for them the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept.''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/PhysicsCalibIntercalibration ||'''ahc2_PhysicsCalibIC_001''' ||'''Default Physics/Calib Intercalibration of 1. and 7. for new ITEP''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/SaturationParameters ||'''ahc2_Sat_001''' ||'''Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet''' ||
||/cd_calice_cernSPS2015/TestbeamAugust2015/SaturationParameters ||'''ahc2_Sat_003''' ||'''Adapted Ambras changes of the number of effective pixels to August data. See ahc2_Sat_003 tag on July data for details'''||

Database Tags for Analysis of 2015 data

Contents

  1. Database Tags for Analysis of 2015 data
  2. July
    1. Pedestal
    2. MIP Calibration
    3. MIP Slopes
    4. Gain Calibration
    5. Gain Slopes
    6. DeadCellMap
    7. Timing
    8. Others
  3. August
    1. Pedestal
    2. MIP Calibration
    3. MIP Slopes
    4. Gain Calibration
    5. Gain Slopes
    6. DeadCellMap
    7. Timing
    8. Others

You can find here the different tags of the DB folders to use for analysis.

The DB folders ModuleDescription, ModuleConnection, ModuleLocationReference, DetectorTransformation and Ahc2HardwareConnection are kept to HEAD version. As it should be updated by only experts. 

Ahc2ModuleDescription        /cd_calice_cernSPS2015/TestbeamXXXX2015/ModuleDescription               HEAD
Ahc2ModuleConnection         /cd_calice_cernSPS2015/TestbeamXXXX2015/ModuleConnection                HEAD
Ahc2ModuleLocationReference  /cd_calice_cernSPS2015/TestbeamXXXX2015/ModuleLocationReference         HEAD
Ahc2DetectorTransformation   /cd_calice_cernSPS2015/TestbeamXXXX2015/DetectorTransformation          HEAD
Ahc2HardwareConnection       /cd_calice_cernSPS2015/TestbeamXXXX2015/Ahc2HardwareConnection          HEAD

July

You can find here the files used for upload to the database. CalibrationFiles_20161507.zip (July)

Pedestal

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal

ahc2_pedestal_007

Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3744 constants

/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal

ahc2_pedestal_010

Correction of a major bug in Pedestal extraction code (shift of channels and wrong pedestal value extracted), 3744 constants

/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal

ahc2_pedestal_013

Pedestal Calibration from Sarah Schroeder (Master thesis), using only ET Pedestals - no EBUs - 3744 constants

/cd_calice_cernSPS2015/TestbeamJuly2015/Pedestal

ahc2_pedestal_014

Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals - no EBUs - 3744 constants

MIP Calibration

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants

ahc2_mip_constants_005

MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_007)

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants

ahc2_mip_constants_008

MIP Calibration from SPS July 2015, 3744 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant (using ahc2_pedestal_010)

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_constants

ahc2_mip_constants_006

MIP Calibration from Sarah Schroeder, no EBUs - 3744 channels (using ahc2_pedestal_013)

MIP Slopes

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes

ahc2_mip_slopes_003

Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_005)

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes

ahc2_mip_slopes_006

Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_008)

/cd_calice_cernSPS2015/TestbeamJuly2015/mip_slopes

ahc2_mip_slopes_004

Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_006)

Gain Calibration

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants

ahc2_gain_constants_004

Gain constants extracted from July Gain runs (04/07 to 08/07), 3744 channels, default value of Gain in case of no constant fitted

/cd_calice_cernSPS2015/TestbeamJuly2015/gain_constants

ahc2_gain_constants_005

Gain constants from Sarah Schroeder, no EBUs - 3744 channels - default values for EBUs

Gain Slopes

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes

ahc2_gain_slopes_003

Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_004)

/cd_calice_cernSPS2015/TestbeamJuly2015/gain_slopes

ahc2_gain_slopes_004

Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_005)

DeadCellMap

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap

ahc2_DeadCells_008

List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels

/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap

ahc2_DeadCells_014

Corrected List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels

/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap

ahc2_DeadCells_017

Corrected List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, T0s and Cherenkows are kept even if no calibration values for theses channels, few channels added

/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap

ahc2_DeadCells_015

List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (ET Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels

/cd_calice_cernSPS2015/TestbeamJuly2015/DeadCellMap

ahc2_DeadCells_016

List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), T0s and Cherenkows are kept even if no calibration values for theses channels

Timing

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamJuly2015/TimeSlopes

ahc2_time_slopes_001

Default time slope of 1.6 ns/TDC

/cd_calice_cernSPS2015/TestbeamJuly2015/TimePedestal

ahc2_time_Ped_001

Default Pedestal for TDC of 1000

Others

/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration

ahc2_IC_003

Default HG/LG Intercalibration 10

/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration

ahc2_IC_004

HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, without EBU

/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration

ahc2_IC_006

HG/LG Intercalibration per chip, obtained with the Daily LED scan done the 15th of July, with default value of 10 for the EBUs

/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration

ahc2_IC_008

HG/LG Intercalibration one value per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the others the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept

/cd_calice_cernSPS2015/TestbeamJuly2015/Intercalibration

ahc2_IC_009

HG/LG Intercalibration per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the new ITEP boards and the old ITEP boards th IC values has been extracted from electrons data (using Yuji's method), except for layer 6 and 10, for them the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept.

/cd_calice_cernSPS2015/TestbeamJuly2015/PhysicsCalibIntercalibration

ahc2_PhysicsCalibIC_002

Default Physics/Calib Intercalibration of 1. and 7. for new ITEP

/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters

ahc2_Sat_001

Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet

/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters

ahc2_Sat_002

Neffpx for layer 3 changed to 2300 and for layer 6 to 10 to 1100 (based hit energy spectra shape comparison assuming 10% XT)

/cd_calice_cernSPS2015/TestbeamJuly2015/SaturationParameters

ahc2_Sat_003

Neffpx tuned using electrons data only for Mainz board (2000) and Old ITEP boards(900). The others are kept with the Neffpx = Real number of pixels

August

You can find here the files used for upload to the database. CalibrationFiles_20162203.tgz (August)

Pedestal

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal

ahc2_pedestal_002

Pedestal value from AT data from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1

/cd_calice_cernSPS2015/TestbeamAugust2015/Pedestal

ahc2_pedestal_004

Pedestal Calibration from Sarah Schroeder (Master thesis), using mixed AT/ET Pedestals from July data (Muons) without any filter on dead or noisy channels, 3888 constants, default value of 250 for EBU_1

MIP Calibration

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants

ahc2_mip_constants_003

MIP Calibration from SPS July 2015, 3888 channels, combinaison of February, April and July Data using mean MIP value per Module in case of no MIP constant, default value of 80 for EBU_1 (using ahc2_pedestal_002)

/cd_calice_cernSPS2015/TestbeamAugust2015/mip_constants

ahc2_mip_constants_004

MIP Calibration from SPS July 2015 from Sarah Schroeder (Master Thesis), 3888 channels (using ahc2_pedestal_004)

MIP Slopes

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes

ahc2_mip_slopes_003

Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_003)

/cd_calice_cernSPS2015/TestbeamAugust2015/mip_slopes

ahc2_mip_slopes_004

Default MIP Slopes with a dependence of -3%/K for EBUs, Mainz and old ITEP & -1%/K for new ITEP and Big Layers (calculated using slope%*MIP from ahc2_mip_constants_004)

Gain Calibration

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants

ahc2_gain_constants_001

Gain constants extracted from July Gain runs (04/07 to 08/07), 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1

/cd_calice_cernSPS2015/TestbeamAugust2015/gain_constants

ahc2_gain_constants_002

Gain constants from Sarah Schroeder, no EBUs, 3888 channels, default value of Gain in case of no constant fitted, default value of 10 for EBU_1

Gain Slopes

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes

ahc2_gain_slopes_002

Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_001)

/cd_calice_cernSPS2015/TestbeamAugust2015/gain_slopes

ahc2_gain_slopes_003

Default Gain slopes depending on the module according to SiPM manufacter specifications ( < -1%/K for Big Layer, -0.5%/K for new ITEP, -1.5%/K for Mainz, -2.1%/K for old ITEP - calculated using slope%*Gain from ahc2_gain_constants_002)

DeadCellMap

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap

ahc2_DeadCells_003

List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data, EBU_1 included, T0s and Cherenkow are kept.

/cd_calice_cernSPS2015/TestbeamAugust2015/DeadCellMap

ahc2_DeadCells_005

List of channels with no fitted Gain/Pedestal/MIP Calibration from SPS July Muon data using Sarah's results (Mixed Pedestal), EBU_1 included, T0s and Cherenkow are kept.

Timing

Folder

DB Tag

Comments

/cd_calice_cernSPS2015/TestbeamAugust2015/TimeSlopes

ahc2_time_slopes_001

Default time slope of 1.6 ns/TDC

/cd_calice_cernSPS2015/TestbeamAugust2015/TimePedestal

ahc2_time_Ped_001

Default Pedestal for TDC of 1000

Others

/cd_calice_cernSPS2015/TestbeamAugust2015/Intercalibration

ahc2_IC_002

Default HG/LG Intercalibration 10

/cd_calice_cernSPS2015/TestbeamAugust2015/Intercalibration

ahc2_IC_003

HG/LG Intercalibration per chn. LED data in ET mode from DESY TB 2016 are used for Mainz board and sensL modules. For the new ITEP boards and the old ITEP boards the IC values has been extracted from electrons data (using Yuji's method), except for layer 6 and 10, for them the mean of the intercalibration constants for the sensL is used. For the EBUs the default value of 10 is kept.

/cd_calice_cernSPS2015/TestbeamAugust2015/PhysicsCalibIntercalibration

ahc2_PhysicsCalibIC_001

Default Physics/Calib Intercalibration of 1. and 7. for new ITEP

/cd_calice_cernSPS2015/TestbeamAugust2015/SaturationParameters

ahc2_Sat_001

Default Neffpx per SiPM type based on the number of pixels specified on the manufacture datasheet

/cd_calice_cernSPS2015/TestbeamAugust2015/SaturationParameters

ahc2_Sat_003

Adapted Ambras changes of the number of effective pixels to August data. See ahc2_Sat_003 tag on July data for details

DBtagsCERN2015 (last edited 2018-02-21 14:00:58 by ChristianGraf)