Event Model for Combined DAQ for the Linear Collider Community
Contents
Introduction to the AIDA2020 project and the WP5 (Data acquisition system for beam tests)
What is AIDA-2020?
The AIDA-2020 project brings together the leading European research infrastructures in the field of detector development and testing and a number of institutes, universities and technological centers, thus assembling the necessary expertise for the ambitious programme of work.
Visit the AIDA2020 webpage.
WP5: Data acquisition system for beam tests
Visit the AIDA2020 WP5 webpage.
AIDA-2020 is divided into 15 Work Packages. A Work Package (WP) is a unit of work within the project. The WPs are theoretically independent but they were defined in order to foster synergies in AIDA-2020.
Objectives
- Specification of interfaces and provision of a control and timing system to allow multiple detectors to be linked together.
- Develop a central data acquisition software and run control to enable multiple detectors to be combined in one experiment.
- Develop monitoring systems to automatically check the data quality.
- Develop a system to monitor the environmental conditions, such as temperature, of several detectors.
- Define an event for online data where data is combined from detectors with very different signals and properties.
Tasks
Task |
Task Leaders |
Task 5.1 Scientific coordination |
David Cussans (UNIBRIS) |
Task 5.2 Interface, synchronisation and control of multiple-detector systems |
David Cussans (UNIBRIS) |
Task 5.3 Development of central DAQ software and run control |
Matthew Wing (UCL) |
Task 5.4 Development of data quality and slow control monitoring |
Fabrizio Salvatore (USSUS) |
Task 5.5 Event model for combined DAQ |
Adrian Irles (DESY) |
WP5 Technology Transfer Officer |
Matthew Wing (UCL) |
Task 5.5: Event Model for Combined DAQ
EUDAQforLC
RawDataEvent format
LCIO data format
Scintillator Calorimeters (AHCAL and ScECAL using Spiroc ASICs)
SDHCAL
Silicon ECAL with tungsten absorber
TPC
Event Building